Battery Backup - Remove
Nickel–Metal Hydride (NiMH) - Remove
MR16 - Remove
Surface - Remove
Sealed Lead Acid (SLA) - Remove

Clear all filters

Battery Backup Title 20 Compliant Nickel–Metal Hydride (NiMH) MR16 Surface Sealed Lead Acid (SLA) Battery Backup

Battery Finder

Sealed Lead Acid Battery

Voltage:
Amps:
Terminal:
View Terminals Types
NiCAD Battery

Voltage:
Cell Type:
Configuration:
Configuration and Size Chart
Lithium Iron Phosphate Battery

Voltage:
Amps:
Terminal:
View Terminals Types

Results: 176
1 2 3 4 5 6

Results: 176
1 2 3 4 5 6

Battery Backup

Products with battery backup contain a battery so in the case of a power outage the lights or signs with stay illuminated for roughly 90 minutes.

MR16

MR16

Title 20 Compliant

Title 20 Compliant

Sealed Lead Acid (SLA)

SLA batteries are the most reliable and widely used power source. They can recharge much faster than a flooded lead acid battery, and the calcium added to their plates helps reduce water loss. Sealed lead acid batteries can recycle the gases they produce and can prevent damage to the battery when the charge rate is controlled. These batteries must always be kept in upright positions and protected from leakage.

Nickel–Metal Hydride (NiMH)

NiMH batteries can have two to three times the capacity of an equivalent size NiCd, and their energy density approaches that of a lithium-ion cell. Nickel–Metal Hydride batteries are good for high current drain applications because of their low internal resistance.
 
The disadvantage of NiMH batteries is their high rate of self-discharge. NiMH batteries typically lose 4% of their charge per day of storage. LSD NiMH batteries significantly lower self-discharge, but at the cost of lowering capacity by about 20%.

Surface

Surface